> Manganese steel tracks
> Steel axis largely dimensioned
> Reinforced chassis
> Speed variation (optional)
> Metallic hopper (optional)
> Models: 10.30 / 13.43 / 13.60
> Solid steel box, with set of liner plates on the back to receive the material impact;
> Vibrating unit composed by two vibrating motors, fitted to the box, makes an inclined linear vibrating movement that causes the regular and channelled advance of the material;
> The production regulation can be done, varying with the position of the counterweight of the vibrating motors;
> Models: 35.08 / 40.10 / 50.11 / 50.13
> A steel crankshaft Chromium - Nickel;
> Silenblock for start/stop damping; Helicoidal spring;
> Frames ready to take in washing systems, for the products crushed;
> Power distribution box in the panel with rubber for shock mitigation;
> Screening capacity up to 150mm;
> Models: 30.13 / 40.13 / 40.15 / 45.18 / 50.20 / 60.20
> 4mm board lined in 450HB steel;
> Suspension system by helicoidal springs;
> Connection square to the concrete or to the regularization hopper;
> Two regulable vibrating motors;
> Model: 50.90 / 60.105 / 70.120 / 80.135 / 100.165 / 120.195 / 150.240
> Adjustable guide blades;
> Drum resting on tires with locking ring;
> When necessary, will be fitted with screening cones;
> Washers ideally for pre-washing or gravel washing clay;
> Models: 13.30 / 16.40 / 16.60 /20.60 / 25.60
> Angle of inclination 20%
> Upper bracket oscillating bearing with tapered roller bearings;
> Support came in the bottom of the bearing and fitted with retainers;
> Removable wear plates on models 606 AM / 906 AM;
> Models: AM 606 L / AM 606 DL / AM 90 L / 906 AM
> It's user to drain to water from the sand;
> Separation of particles up to 100 microns;
> It features low power consumption per cubic meter produced;
> Models: 05.20 / 07.30 / 10.30 / 14.30 / 15.40
EUROTAM / TRC / UPN
400; 500; 600; 650; 800; 1000; 1200